HOW TO MAKE A Very simple Picture Frame

How to make a very simple photograph frame. This move by move tutorial shows you how to make plywood and plexiglass frames to screen pics or fun holiday printables!&nbsp



These are seriously entertaining to make and display your preferred photos, printables.



Or you can make them as a present!



Do it yourself Custom Photograph Frames



I am applying these with Christmas&nbspprintables for now but these will ultimately go on the white wall reverse the&nbspcolorful accent wall in the kids&rsquo area.



With all that coloration going on, I desired to convey in some heat wooden tones. but we have a extremely particular established of baby images of the young children that have been in their space without end! I asked them if they wanted me to alter them out but equally unanimously agreed they however required them!



We had been making use of basic white Ikea frames so I decided to use this chance to build enjoyable frames and also use up some scrap plywood in the process. (There is a little something about the fulfillment you get from using scrap wood&hellip)



The pictures can be very easily switched out by just taking off all those screws! I additional some succulent printables just for enjoyable.




Rustoleum sent me their white and black wooden grain enhancer to consider out and I enjoy the impact it adds.



Acquire a search closer! It&rsquos rather great!&nbsp



Products required to make the basic photograph body:




  • Plywood &ndash minimize to dimensions. I used 8&Primex10&Primary

  • Plexiglass&nbsp&ndash reduce to size. I employed seven&Primex9&Prime

  • Masking tape

  • &frac34&rdquo wood screws

  • Stain of your alternative &ndash I applied&nbspGolden Oak by Varathane

  • White wooden grain enhancer

  • Black wood grain enhancer

  • Metal brush

  • Straight edge and box cutter &ndash to slash the Plexiglass

  • (optional)&nbspBladeRunner X2&nbsp&ndash to reduce the Plexiglass

  • Drill

  • Screwdriver



If you are a visible person like me, in this article are the proportions &ndash&nbsp



Earning the frames is quite basic and easy. Nevertheless, Acrylic Photo Near me uncovered a handful of issues doing work with plexiglass for the to start with time. I have highlighted that below. Just pay out interest to individuals and producing these exhibit frames will be a snap!



Listed here is the complete video tutorial on how t make the frames. The entire published guidance abide by.



How to make the wood and plexiglass frames &ndash



Move one &ndash&nbspStart by staining the plywood in the shade of your decision. I used Golden Oak simply because it intently matches the Hardwood flooring in the area.Stage 2 &ndash&nbspIf you are utilizing the grain enhancer, wipe the floor with h2o to assistance pop the grain. When the surface area is even now wet, scrub it with the metal brush.&nbspThis is quite important to get the grain enhancer to work.&nbspPhase three &ndash&nbspOnce the floor is dried, wipe it properly and apply the wooden grain enhancer&nbsptowards the grain. Wipe it off after a few minutes with a gentle hand in the exact same route you utilized it.



Move four &ndash&nbspGet your plexiglass all set. To lower the plexiglass, you can use a straight edge and a box cutter to rating seven-8 occasions and snap. It makes a very clear slash. I required to make 4 of the frames so I made a decision to carry out my&nbspBladeRunner X2&nbspwhich helped make the course of action a bit more quickly.Phase five &ndash&nbspMeasure the locale&nbspand position the plexiglass on the plywood. I used masking tape to keep it in its spot. Then I measured and marked the spots for the screws.



Move six &ndash&nbspUse a drill little bit that is large sufficient for the screw to go via quickly. I utilized a five/32&Key.&nbspDrill&nbspvery slowly and gradually! The masking tape retains the plexiglass from cracking. Once you hit the wood on the bottom, you will really feel resistance. Stop when you have established a pilot hole in the wood.Action seven &ndash&nbspPlace the image or printable on the plywood. Use double-sided tape to keep it in spot. Get rid of protecting masking from the plexiglass and connect with the wooden screw. It is important&nbspto use a guide screwdriver&nbspso you have control on the stress and how much the screw goes. If not, you can finish up cracking the plexiglass.



&nbspAdd Sawtooth hangers on the again and hold&nbspthem up!&nbsp



The wood grain enhancer adds a amazing result! I employed the black wood grain enhancer on two and the white on two.


I can&rsquot decide if I like the black much more&hellipOr the white&hellip&nbsp


Leave a Comment